Yamaha TF Digital Mixer driver for Windows 7 - Yamaha TF Digital Mixer driver from Yamaha for OS

Yamaha TF Digital Mixer 2.01

Yamaha TF Digital Mixer driver from Yamaha for OS Independent

Yamaha TF Digital Mixer driver from Yamaha for OS Independent

Publisher review for Yamaha TF Digital Mixer 2.01:

Before install Yamaha TF Digital Mixer 2.01you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Yamaha TF Digital Mixer . We recommend to always use most recent version of a driver.

This package provides the necessary installation files for Yamaha TF Digital Mixer Firmware 2.01.Enhancements:- Now supports NY64-D option card for Dante Interface. Connection with Dante devices (such as Tio1608-D, R series, etc.) is available via the NY64-D. In addition, HA control is also available with Tio1608-D and R series.
Fixes:- Solved the problem in which some faders would rarely indicate slightly shifted values when operating the fader bank or SENDS ON FADER.
- Solved the problem in which connecting a USB cable between Mac and the console while both are running would occasionally halt the signal processing, and the console would not restore until restarting it.
- Solved the problem in which a message "Dante Version Mismatch" may appear for a few seconds when making patches from R series V3.11 (Rio3224-D, Rio1608-D, Ri8-D) via NY64-D by Dante Controller.
- Solved some minor bugs.
Installation steps:1. Turn off the power to the TF series.
2. Connect the USB memory (formatted in FAT32) to the USB connector of your computer.
3. Copy the “TF_updater_v***.bin” (*** indicates the version number) in the folder extracted from the downloaded zip file to the root directory of the USB memory.
4. Remove the USB memory when the files have been copied.
5. Connect the USB memory to the TF USB connector (right side), then turn on the power to the TF series. An "Update firmware?" message will be displayed.
6. Touch the “Update” button to start loading the firmware. CAUTION ：DO NOT OPERATE ANY CONTROL OF THE CONSOLE (SWITCHES, KNOBS, FADERS, ETC.) WHILE UPDATING THE FIRMWARE. Some update versions require the following additional steps (7 and 8) to update the [TFREC] module.
7. Wait for approximately two minutes, after the firmware has been loaded, the TF series automatically restarts and a "TFREC UPDATING..." message appears. While this message is shown, do not operate any of the console controls.
8. When a "TFREC UPDATE FINISH.” popup window (or similar message) appears, press the CLOSE button to close it.
9. Check the TF firmware version number from the version field in the “About” screen of the SYSTEM SETUP screen to confirm updating was completed. The firmware update is now complete.

Operating system:
OS Independent